Menu

0

£0.00

Kent Crossflow

Kent Xflow
Kent Xflow
Kent Xflow

Here are some examples of engine builds that we can offer.  Prices do not include ancillaries, for more information please see Optional Extras below.  Prices are based on the customer supplying suitable donor parts such as engine block, cylinder head, crankshaft and sump all depending on the customers requirements however we have a large stock of core units available at extra cost.

110-120 bhp

£4195

1600-1690cc Suitable for Fast Road Use

 Oversize 1300 STD Type Pistons

 Crankshaft Journals Reground

 Lightened and Refaced Flywheel

 HD Flywheel Bolts

 Balanced Rotating Assembly

 HD Big End and Main Bearings

 HD Conrod Bolts

 Ported Cylinder Head

 HPE Spec Fast Road Camshaft

 Double Valve Springs

 Steel Rocker Shaft

 High Pressure Oil Pump

 Water Pump

140-150 bhp

£5795

1660-1700cc Suitable for Fast Road, Trackdays and Rally Use

 Oversize Forged Pistons

 Crankshaft Journals Reground

 Lightened and Refaced Flywheel

 Flywheel Double Dowelled to Crankshaft

 HD Flywheels Bolts

 Billet Steel Front Pulley

 Balanced Crankshaft Assembly

 HD Big End and Main Bearings

 ARP Conrod Bolts

 Ported Big Valve Cylinder Head

 HD Head Gasket

 HPE Spec High Torque Camshaft

 Double Valve Springs

 Steel Rocker Posts and Rocker Shaft

 Duplex Adjustable Cam Gears

 High Pressure Oil Pump

 Water Pump

160+ bhp

£7575

1700cc Suitable for 1/4mile, Hillclimb and Circuit Use

 Oversize Forged Pistons

 Crankshaft Journals Reground

 Lightweight Billet Steel Flywheel Double Dowelled to Crankshaft

 ARP Flywheel Bolts

 Billet Steel Front Pulley

 Balanced Crankshaft Assembly

 Forged Steel H-Section Conrods with ARP Bolts

 HD Big End and Main Bearings

 Full Race Big Valve and Ported Cylinder Head

 Inlet Manifold Port Matched and Doweled to Head

 ARP Head Stud Kit

 Cometic Gaskets Throughout

 HPE Spec Full Race Camshaft

 Double Valve Springs

 Steel Rocker Posts and Rocker Shaft

 Duplex Adjustable Cam Gears

 High Pressure Oil Pump

 Water Pump

OPTIONAL EXTRAS

Ancillaries

2x 40dcoe, Manifold, Linkage and Fuel Unions £1075

2x 45dcoe, Manifold, Linkage and Fuel Unions £1075

HPE Electronic Ignition Kit £275

HPE Bestek Billet Ignition Kit £395

HPE HT Leads £72

Clutch Kit For Std Gearbox £96

Clutch Kit for Type 9 & Type E Gearbox £130

Helix Clutch Kit £419.15

Brise 65amp Alternator £234

WOSP 95amp Billet Alternator £438

Wosp 1.4kw Starter Motor £250

HPE 4-1 Exhaust Manifold £395

Dress Up Parts

HPE Aluminium Rocker Cover £150

H22 Multi-V Billet Alloy Pulley Set £200

H22 Alternator Tensioner £30

H22 Water Pump Inlet £130

Billet Thermostat Housing £50

Billet Oil Filler Cap £45.50

Engine Upgrades

Forged Steel Crankshaft £2325

Forged Steel H-Section Conrods £540

TTV 7 1/4″ Twin Plate Clutch and Flywheel £950

Jenvey/Omex Fuel Injection Kit £2650

Titan Dry Sump Kit £1050

Please note: The Engine Builder section is to give an idea of what we can offer and the costings involved, however, we can build anything from Ultimate Race down to a standard rebuild. All Prices are based on the customer supplying a suitable donor Engine to work from however we carry stock of donor engines if you do not have one to supply. Prices are subject to change at any time. Please call or email to discuss your exact requirements and to get an uo to date quote.

[motor_gallery orderby=”title” order=””]
en_GBEnglish